Paint Remover Kit

Paint & Varnish Remover:

Shake well before using. Heavily coated surfaces and deeply ingrained stains may require more than one application.

• Protect surrounding areas and remove hardware if necessary.
• Shake well and pour into a plastic container.
• Use a paint brush and apply a liberal amount of Lift Off® to the desired area.
• Wait 5 minutes.
• Use a scraper or stripping pad to lift the coating working in the same direction as the wood grain.
• Repeat if necessary.
• Clean surface with warm water and clean cloth to remove excess coatings and Lift Off® from surface.
• Allow surface to air dry.
• Stripped coatings will remain intact for safe disposal.
• Allow stripped coatings to dry completely before disposing in trash.

The use of gloves is recommended to protect skin from drying caused by exposure to Lift Off® and removed coatings.

All Surface Cleaner And Paint Prep:

• Test on an inconspicuous area.
• Cover all surfaces not intended to be treated.
• Thoroughly spray area and wait at least 60 seconds.
• Agitate with a soft brush if necessary.
• Wipe clean with a clean, wet, cloth.
• Lightly sand treated area to remove heavy build-up if necessary.
• Allow surface to air dry completely before painting or applying wallpaper.

Latex Paint Remover:

For Hard Surfaces:
1. Apply to area and wait at least 60 seconds.
2. Agitate with a soft brush if necessary.
3. Wipe with a clean white cloth or rinse clean if possible.

For Porous Surfaces:
1. Apply to area and wait at least 3 minutes.
2. Agitate with a stiff brush.
3. For best results remove paint with a high pressure water system set at 1200 psi (or greater)
working from bottom to top.

For Vehicles:
1. Apply to directly onto area.
2. Wipe immediately with clean, white cloth.
3. Do not leave on vehicle for longer than 30 seconds.
4. Completely wash Lift Off® from vehicle after treatment.

Spray Paint And Graffiti Remover:

For Vehicles:

• Test in an inconspicuous area to ensure surface integrity and compatibility.
• Spray Lift Off™ on painted area and wait 60 seconds.
• Wipe treated area with clean, white cloth.
• Completely rinse Lift Off® from vehicle after treatment. Do not allow Lift Off® to remain on vehicle for prolonged periods of time.
• Heavy duty jobs may require more than one application. Repeat if necessary.
• CAUTION: Avoid applying Lift Off® to vehicles in direct sunlight.

For Hard Surfaces: 

• Test in an inconspicuous area to ensure surface integrity and compatibility.
• Spray Lift Off™ on painted area and wait 60 seconds.
• Wipe treated area with clean, white cloth.
• Heavy duty jobs may require more than one application. Repeat if necessary.
• CAUTION: Lift Off® may remove surface paint. Test for colorfastness on vinyl siding. Lift Off® may lighten the surface. To avoid color differentiation completely clean vinyl siding.

For Hard Surfaces, Porous Surfaces:

• Test in an inconspicuous area to ensure surface integrity and compatibility.
• Spray Lift Off™ on painted area and wait 3 minutes.
• Agitate with a stiff brush
• For best results remove paint with a high pressure water system set at 1200 psi or greater working from bottom to top.
• Heavy duty jobs may require more than one application. Repeat if necessary.