-20%
-20%

Paint Remover Kit

99613

$44.99

$35.99
Description

Four Fantastic Products in One Kit!

Our Paint Remover kit includes Latex Paint Remover, Graffiti Remover, Paint and Varnish Remover, All Surface Cleaner, and Paint Prep.

Easily Remove Paint with Latex Paint Remover

Latex Paint Remover easily removes latex paint and latex enamels from walls, trim, molding, floors, wood, vinyl, tile, laminate, metal, brick, concrete, and vehicles. Will not melt or dissolve paint. 

Graffiti Be Gone! 

Remove paint scuffs, paint transfer, spray paint, aerosol paint, acrylic, enamels, and oil lacquer from vehicles, boats, RVs, street signs, fiberglass, metal, tile, vinyl, plastic, brick, and concrete. 

Paint and Varnish Remover

Paint and Varnish Remover removes solvent- and water-based paints, varnishes, wood stains, lacquers, polyurethane, epoxy, and shellac from cabinet, floor, furniture, wood, metal,  stoner, and masonry surfaces. 

Use for Cleaning – Removes Grease and Grime

All Surface Cleaner and Paint Prep removes dirt, oil, grease, scuff marks, residues, wallpaper paste, wax, and mildew stains.

How to Use

Paint & Varnish Remover:

Shake well before using. Heavily coated surfaces and deeply ingrained stains may require more than one application.

  • Protect surrounding areas and remove hardware if necessary.
  • Shake well and pour into a plastic container.
  • Use a paint brush and apply a liberal amount of Lift Off® to the desired area.
  • Wait 5 minutes.
  • Use a scraper or stripping pad to lift the coating working in the same direction as the wood grain.
  • Repeat if necessary.
  • Clean surface with warm water and clean cloth to remove excess coatings and Lift Off® from surface.
  • Allow surface to air dry.
  • Stripped coatings will remain intact for safe disposal.
  • Allow stripped coatings to dry completely before disposing in trash.

The use of gloves is recommended to protect skin from drying caused by exposure to Lift Off® and removed coatings.

All Surface Cleaner And Paint Prep:

  • Test on an inconspicuous area.
  • Cover all surfaces not intended to be treated.
  • Thoroughly spray area and wait at least 60 seconds.
  • Agitate with a soft brush if necessary.
  • Wipe clean with a clean, wet, cloth.
  • Lightly sand treated area to remove heavy build-up if necessary.
  • Allow surface to air dry completely before painting or applying wallpaper.

Latex Paint Remover:

For Hard Surfaces:
1. Apply to area and wait at least 60 seconds.
2. Agitate with a soft brush if necessary.
3. Wipe with a clean white cloth or rinse clean if possible.


For Porous Surfaces:
1. Apply to area and wait at least 3 minutes.
2. Agitate with a stiff brush.
3. For best results remove paint with a high pressure water system set at 1200 psi (or greater)
working from bottom to top.


For Vehicles:
1. Apply to directly onto area.
2. Wipe immediately with clean, white cloth.
3. Do not leave on vehicle for longer than 30 seconds.
4. Completely wash Lift Off® from vehicle after treatment.

Spray Paint And Graffiti Remover:

For Vehicles:

  • Test in an inconspicuous area to ensure surface integrity and compatibility.
  • Spray Lift Off™ on painted area and wait 60 seconds.
  • Wipe treated area with clean, white cloth.
  • Completely rinse Lift Off® from vehicle after treatment. Do not allow Lift Off® to remain on vehicle for prolonged periods of time.
  • Heavy duty jobs may require more than one application. Repeat if necessary.
  • CAUTION: Avoid applying Lift Off® to vehicles in direct sunlight.

For Hard Surfaces: 

  • Test in an inconspicuous area to ensure surface integrity and compatibility.
  • Spray Lift Off™ on painted area and wait 60 seconds.
  • Wipe treated area with clean, white cloth.
  • Heavy duty jobs may require more than one application. Repeat if necessary.
  • CAUTION: Lift Off® may remove surface paint. Test for colorfastness on vinyl siding. Lift Off® may lighten the surface. To avoid color differentiation completely clean vinyl siding.

For Hard Surfaces, Porous Surfaces:

  • Test in an inconspicuous area to ensure surface integrity and compatibility.
  • Spray Lift Off™ on painted area and wait 3 minutes.
  • Agitate with a stiff brush
  • For best results remove paint with a high pressure water system set at 1200 psi or greater working from bottom to top.
  • Heavy duty jobs may require more than one application. Repeat if necessary.
Shipping & Returns

We offer FREE SHIPPING on all domestic orders over $49 in the 48 contiguous states. Customer orders selected for FREE SHIPPING at checkout will be shipped via ground shipping (carrier may vary).