For Clothes, Upholstery & Nonwashables:
1. Test for colorfastness by spraying an inconspicuous area. 2. Blot wet stains with a clean, white cloth or paper towel, if possible. Remove loose grime. 3. Spray stain thoroughly; wait at least 60 seconds. 4. Gently agitate (use brush if necessary), then blot with clean, white towel or cloth. Repeat if necessary. 5. For best results on nonwashable materials, dry with a hair dryer on medium heat.
Apply according to the instructions above. Then place a clean, white cloth or paper towels over the treated area, followed by something flat and heavy like a phonebook. In a few hours, the towel will absorb any excess stain dampness or residue from the stain.
1. Spray stain thoroughly; wait at least 60 seconds. 2. Agitate if necessary (the back end of a tooth brush works well). Repeat if necessary. 3. Launder as fabric recommendations allow.
For Walls, Countertops, Floors & Tile:
1. Spray stain thoroughly; wait at least 60 seconds. 2. Wipe with a clean towel or rinse off. Repeat if necessary.
CAUTION: HARMFUL IF SWALLOWED. EYE AND SKIN IRRITANT.
— — USE UNDER WELL–VENTILATED CONDITIONS. KEEP FROM OPEN FLAME OR SPARK. Avoid contact with eyes and skin. For eye contact, flush with water for at least 15 minutes. Obtain medical attention. For skin contact, wash thoroughly with soap and water. Do not ingest. If swallowed, do not induce vomiting. Immediately call a physician. Contains acetone.
DO NOT FREEZE • KEEP OUT OF REACH OF CHILDREN AND PETS
The warranty for this quality-tested product is limited to purchase price.
No other guarantee is furnished or implied.
Always test on inconspicuous area first. Not recommended for use on latex painted walls, non-colorfast materials or woodwork.