1. Test for colorfastness by spraying an inconspicuous area. 2. Blot/wipe wet paint spot thoroughly with a clean, white cloth or paper towel. 3. Spray paint spot thoroughly; wait at least 60 seconds. 4. Gently agitate (use brush if necessary) to loosen dried paint, then wipe or blot thoroughly with clean, white towel or cloth. Repeat if necessary. 5. For best results on non–washable materials, dry with hair dryer on medium heat.
Apply according to the instructions above. Then place a clean, white cloth or paper towels over the treated area, followed by something flat and heavy like a phonebook. In a few hours, the towel will absorb any excess stain dampness or residue from the stain.
1. Spray paint spot thoroughly; wait at least 60 seconds. 2. Agitate if necessary (the back end of a tooth brush works well). Repeat if necessary. 3. Launder as fabric recommendations allow.
For Floors, Concrete, Linoleum, Brick, Tile, Counter–tops, and Cars:
1. Spray paint spot thoroughly; wait at least 60 seconds. 2. Use brush or cloth to agitate (loosen) dried paint. 3. Wipe with clean towel, or if possible, rinse off. Repeat if necessary.
Be cautious with use on concrete, test on an inconspicuous area first.
CAUTION: HARMFUL IF SWALLOWED. EYE AND SKIN IRRITANT.
Avoid contact with eyes and skin. For eye contact, flush with water for at least 15 minutes. Obtain medical attention. For skin contact, wash thoroughly with soap and water. Do not ingest. If swallowed, do not induce vomiting. Immediately call a physician.
DO NOT FREEZE • KEEP OUT OF REACH OF CHILDREN AND PETS
The warranty for this quality-tested product is limited to purchase price.
No other guarantee is furnished or implied.
Always test on inconspicuous area first. Not recommended for use on latex painted walls, non-colorfast materials or woodwork.